10 Pcs 3x140mm Needle File Set Hand Tools For Jeweler Wood Carving Craft Metal Glass Stone Stainless Steel Polishing Carving

black yellow

Product selling points:

1. Uniform filing teeth: manual processing of filing teeth has uniform and consistent lines, high cutting efficiency

2. Bearing steel material: GCR15 bearing steel material has high hardness and toughness, and the hardness is as high as HRC60. It is wear-resistant and durable, and is not easy to deform.

3. Anti-slip handle: rubber-coated anti-slip handle, surface particle treatment, anti-slip comfort, ergonomic design and comfortable use

4. Surface quenching: surface quenching treatment, enhance surface hardness, greatly enhance durability

5. A set of files can solve a variety of troubles, and you can choose as wide as you want

6. Boutique storage bag: each set of files is equipped with a storage bag for easy storage

7. Superior performance: good heat dissipation performance, so that the surface of the workpiece will not heat up due to overheating, change color or leave residual glue during grinding

Product specifications:

Product Name: Diamond File

Basic material: GCR15 bearing steel

Product advantages: high hardness, durable, not easy to wear

Product size: 14*0.3cm

File specifications: flat files, semicircular files, triangular files, square files, round files, knife files, oval files, flat files, single-sided files, lancet files

Scope of application: jade polishing, wood carving polishing, ceramic polishing, metal polishing

Grinding and polishing of various stainless steel/copper/iron/aluminum/plastics and other metal and non-metal materials are good accessories for surface grinding treatment

Handle: plastic encapsulation process

Instructions for use:

1. The assorted file is made of bearing steel, hard and brittle, and the file is thin. It is strictly forbidden to press it down during use to prevent the file from breaking.

2. Use one side of the new file first, and then use the other side when that side is blunt.

3. When filing, always use a wire brush to remove the chips on the teeth of the file.

4. Files cannot be stacked together.

5. After use, it is recommended to remove the chips first and then apply anti-rust oil, which can extend the service life.

List:

File*10

Red

Product selling point:

1. The surface is nickel-plated, which has anti-rust effect, the file is not easy to rust, and the whole is bright and bright. The nickel-plated process is fixed on the file, and the file is sharp, wear-resistant and durable.

2. T12 carbon tool steel, the selected carbon steel matrix is forged as a whole, with the characteristics of hardness, high toughness and wear resistance.

3. Rubber coated handle: The handle is made of soft rubber, which is ergonomically designed and comfortable to use

4. Good toughness and high hardness: high temperature quenching treatment, fine particles, excellent anti-corrosion technology

5. The diamond particles are uniform: the diamond particles are fixed by a special production process, the adhesion, grinding degree and wear resistance are improved, the grinding precision is improved, and the file is wear-resistant and durable.

6. Boutique storage bag: Each set of files is equipped with a storage bag, which is convenient for storage

7. Superior performance: good heat dissipation, so that the workpiece surface will not heat up due to overheating, discolor or leave residual glue during grinding

Product Specifications:

Product name: diamond file

Basic material: T12 carbon steel

Product advantages: high hardness, durable, not easy to wear

Product size: 14*0.3cm

File specifications: flat file, square file, pointed flat file, round file, oval file, half-round file, triangle file, lancet file, double half-round file, knife-shaped file

Scope of application: jade grinding, wood carving grinding, ceramic grinding, metal grinding

Grinding and polishing of all kinds of stainless steel/copper/iron/aluminum/plastic and other metal and non-metallic materials, it is a good accessory for surface grinding treatment

Instructions for use:

1. Do not file the oxide layer of the workpiece with a file. The hardness of the oxide layer is large and it is easy to damage the teeth. The oxide layer can be ground with a grinding wheel or with a chisel.

2. Use one side of the new file first, and then use the other side after the side is blunt.

3. In the process of using the file, always use a copper wire brush (or wire brush) to brush the debris embedded in the tooth groove along the direction of the tooth pattern. After use, carefully brush all the debris before storing.

4. When using the file, the speed should not be too fast, otherwise it will be easy to blunt prematurely. The best frequency of the file going back and forth is 40 times/min, and the length of the file is 2/3 of the total length of the tooth surface.

5. When using the file to file the workpiece, the file should avoid water, oil or other dirt, which will corrode the file and slip during filing.

6. Diamond files are widely used for filing hard metals, but not for filing soft metals, such as aluminum, copper, etc.

7. Do not use the file as other tools, such as: knocking, prying, pressing, twisting, pulling, topping, bumping and other operations.

8. When using the file, the force should not be too large, so as not to break or deform.

9. When storing files, there should be no collision or overlapping storage; the humidity in the storage place should not be too high, and it is required to keep dry and ventilated.

List:

File*10

blue

Product selling point:

1. The surface is titanium-plated, with anti-rust effect, the file is not easy to rust, and the whole is bright and bright

7. Superior performance: good heat dissipation, so that the workpiece surface will not heat up due to overheating, discolor or leave residual glue during grinding

3. Rubber coated handle: The handle is made of soft rubber, which is ergonomically designed and comfortable to use

4. Good toughness and high hardness: high temperature quenching treatment, fine particles, excellent anti-corrosion technology

5. The diamond particles are uniform: the diamond particles are fixed by a special production process, the adhesion, grinding degree and wear resistance are improved, the grinding precision is improved, and the file is wear-resistant and durable.

6. Boutique storage bag: Each set of files is equipped with a storage bag, which is convenient for storage

Product Specifications:

Product name: Gold titanium plated diamond file

Basic Material: Tool Steel

Product advantages: high hardness, durable, not easy to wear

Product size: 3*14cm /4*16cm / 5*18cm (optional)

File specifications: flat file*1+semi-round file*1+triangular file*1+square file*1+round file*1+pointed flat file*1 double half-round file*1+willow file*1+knife file*1 +Oval file*1

Scope of application: jade grinding, wood carving grinding, ceramic grinding, metal grinding

Grinding and polishing of all kinds of stainless steel/copper/iron/aluminum/plastic and other metal and non-metallic materials, it is a good accessory for surface grinding treatment

Instructions for use:

1. Do not file the oxide layer of the workpiece with a file. The hardness of the oxide layer is large and it is easy to damage the teeth. The oxide layer can be ground with a grinding wheel or with a chisel.

2. Use one side of the new file first, and then use the other side after the side is blunt.

3. In the process of using the file, always use a copper wire brush (or wire brush) to brush the debris embedded in the tooth groove along the direction of the tooth pattern. After use, carefully brush all the debris before storing.

4. When using the file, the speed should not be too fast, otherwise it will be easy to blunt prematurely. The best frequency of the file going back and forth is 40 times/min, and the length of the file is 2/3 of the total length of the tooth surface.

5. When using the file to file the workpiece, the file should avoid water, oil or other dirt, which will corrode the file and slip during filing.

6. Diamond files are widely used for filing hard metals, but not for filing soft metals, such as aluminum, copper, etc.

7. Do not use the file as other tools, such as: knocking, prying, pressing, twisting, pulling, topping, bumping and other operations.

8. When using the file, the force should not be too large, so as not to break or deform.

9. When storing files, there should be no collision or overlapping storage; the humidity in the storage place should not be too high, and it is required to keep dry and ventilated.

List:

3*14cm flat file*1+semi-round file*1+triangular file*1+square file*1+round file*1+pointed flat file*1 double half-round file*1+willow file*1+knife file* 1+Oval file*1

black

Product selling points and features:

1. Bearing steel material: high and uniform hardness and wear resistance, high temperature quenching, durable and not easy to rust.

2. Design advantages: ensure that the surface of the workpiece is clean and tidy after filing, and the filing pattern is finely designed, which is suitable for small and precise workpiece processing.

3. Tooth surface design: The ingenious tooth surface design, the distance between the teeth and the height of the tooth surface are very smooth and orderly, just right.

4. Handle design: It is comfortable to hold, and the interface is tightly handled to prevent the file from slipping off during operation.

5.1 sets of various specifications

Product parameters:

Product name: 3x140 small fine tooth woodworking file

Material: bearing steel

Optional specification: 10pcs

10pcs includes: flat file*1 pointed flat file*1 half-round file*1 oval file*1 triangular file*1 single-sided file*1 round file*1 rounded file*1 square file*1 knife-shaped file*1

Scope of application: Grinding and polishing of all kinds of stainless steel/copper/iron/aluminum/plastic and other metal and non-metallic materials, it is a good accessory for surface grinding treatment

Instructions for use:

1. Assorted files are made of bearing steel, hard and brittle, and the files are thin. It is strictly forbidden to press down during use to prevent the files from breaking.

2. Use one side of the new file first, and then use the other side when the side is blunt.

3. When filing, always use a wire brush to remove the chips on the filing teeth.

4. The files cannot be overlapped together.

5. After use, it is recommended to remove the chips first and then apply the anti-rust oil, which can prolong the service life.

Packaging and List:

10-in-1 flat file*1+pointed flat file*1+semi-round file*1+oval file*1+triangular file*1+single-sided file*1+round file*1+rounded file*1+square file* 1+Knife file*1